Mosfet 30A 12V or 24V Ender 3 / PRO, Anet A6, A8 Heatbed 3D printer, + FAN

Description

MOSFET dedicated to 3D printers such as Ender 3 / 3Pro, Anet A8 / A6 and all low-cost printers with 12V or 24V power supplies. Use of a module with a MOSFET transistor, we can significantly relieve the printer's motherboard, which significantly extends its life, improves its stability and heating properties. This is a basic modification for 3D printers. The components used for the construction are of the highest quality. Another important modification is galvanic separation. The 40mm fan used makes the module have much better thermal properties.
The fan only runs when it is heating up. Keeps the temperature of the transistor constant!
The most important parameters:
1. The system works with 12V or 24V power supplies.
2. The maximum: 30A.
3. It has a LED that indicates heating.
4. PCB board designed in such a way as to withstand high current loads and properly dissipate heat.
5. Galvanic separation.
6. Possibility to connect an external fan to the additional DC output.
7. Available STL file with a dedicated stand as for 3D animation.
Included:
1. MOSFET module.
2. Screws, spacers, nuts (M3mm).
3. 3 x Connector.
4. FAN