-40%
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel
For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel

For Anet-A2 A8 3d-Printer Extruder Kit Print-Head Themostat Heater Nozzle Barrel

$ 5.57

Availability: 14 in stock
  • Aluminum block size: 20x 20x10mm
  • Application: 3D printer
  • Installation type: external threaded connection
  • Filament size: 1.75mm
  • Brand: Unbranded
  • Throat pipe length: 30mm
  • Package Contents: 1x Extruder 1x Heating tube
  • Material: Aluminum + Stainless steel + Brass
  • Condition: New
  • Type: Extruder

    Description

    Product Description
    Item Details:
    *For Anet A2 A8 3dPrinter Extruder Kit Print Head Themostat Heater Nozzle Barrel
    *100% brand new and high quality
    *Suitable for Anet A2 A8 3Dprinter
    *Nozzle tip, aluminum heating block, throat pipe (built-inTeflon)
    *MK8 extruder kit, white wire was temperature thermistor, red wire was heating tube (12V 40W)
    Specification:
    *Installation type: external threaded connection
    *Application: 3Dprinter
    *Filament size: 1.75mm (Approx)
    *Nozzle size: 0.4mm (Approx)
    *Throat pipe length: 30mm (Approx)
    *Aluminum block size: 20x 20x10 mm (Approx)
    *Material: Aluminum + Stainless steel + Brass
    *Operating temperature range: -40~ + 260°C (-40~ + 500°F)
    *Thermistor and heater cable length: 1M (Approx)
    Package Contents:
    1*
    Extruder
    1*Heating tube (heating tube 1 m long, 12V 40W)
    1*1.75MM 0.4MM Brass Nozzle
    1*M6*30mm Throat pipe (built-in Teflon)
    1*Thermistor + Brass sleeve (1 meter long)
    Note:
    1.
    The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.
    Please allow slight manual measurement deviation for the data.
    Payment
    Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
    Delivery details
    We only
    ship to confirmed ebay Order addresses.
    Please comfirm that your Order address is in line with your shipping address.
    Please kindly note that
    the c
    ombined shipping
    is not provided
    because the shipping fee is calculated by weight. Also, the each additional item means
    exactly
    the the same color and size.
    It takes about
    7
    -15 working days to US; about 10-30 working days to other countries.
    Transit time may be a little delayed because of the
    bad
    weather and customs
    inspection
    . If you
    do
    not receive your
    item
    within 30 working days since payment finished, please contact us immediately for further assistance.
    Contact us
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
    p
    lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
    working hours.
    On Oct 18, 2022 at 01:25:59 PDT, seller added the following information: