BIGTREETECH Driver Adapter V0.0 Module Support 5/12V Output Voltage Motor driver

Description

Product introduction：
Many people want to use stepper motor drivers directly on the 3D printer motherboard to support larger drive voltages and currents. However, the signal voltage range of most stepper motor drivers is 5~24V, and at the same time, the signal level of many pluggable 3D printed motherboards is a logic voltage of 3.3V, so there is no way to drive them directly. The power supply voltage of Driver adapter V0.0 can reach 60V, and it can output 5V or 12V voltage for the signal voltage of the stepper motor driver.
The signal wiring of Driver adapter V0.0 adopts common cathode wiring, which can be directly cut into two parts with a motor wire to connect the main board with the driver, the driver and the motor.
Product Features
1. The wiring is convenient, and the previous motor cable and the main board motor seat can be directly used, which is firm and reliable.
2. The board supports a maximum power input voltage of 60V.
3. The LED indicator of VDD, STEP, DIR, EN signal indicates.
4. Support 5V, 12V output signal voltage.