5015 12V blower fan lot 3D Printer 50mm fan Reprap

Description

This listing is for IdeaFormer branded 5015 12V blower fans. The exterior dimensions are shown in the images verified with a digital caliper.
The outside dimensions are 51.5mmx51.5mm, with a tolerance of 0.5mm. The screw holes are 57mm apart with a tolerance of 0.3mm. The screw holes have a diameter of 4.6mm with a tolerance of 0.3mm. Exterior is 15mm thick with a tolerance of 0.3mm.
The cable has a 2 pin female connector (shown in the images). The cable length is approximately 285mm (a little over 11") from the fan casing to the connector.
THE DIGITAL CALIPER IN THE IMAGES IS JUST USED TO INDICATE DIMENSIONS, IT IS NOT INCLUDED IN THE SALE.
5015 Blower fan
Voltage: 12
V
Rated Current :
0.15A±10%
Speed :
3000±10% for RPM
Noise Level :
20dba±10%
Net Weight :
25g each
2 Pin Dupont