42 Stepper Damper Meal & Rubber Stepper Motor 17 Shock Absorber With Heat Si-HW

Description

Feature:
1. These vibration dampers are suitable for 3D printer and other machine adopted NEMA17 stepper motors
2. Each package contains 4 pieces screws for you to use, enough for you to use and can provide a lot convenience in the process of using
3. Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3d Printer, eliminating vibration and effectively improving 3D printing  quality
4. 1 Piece Damper used per Stepper or Electric motor
5. 3D Printers see a 5-10dB reduction in noise when used on X and Y Axis steppers with the vibration damper for Nema 17.
6. Works on both Cartesian and Delta style Additive Manufacturing machines such as CR-10 Pair these with good filament for the best results in your 3D printer and remove vibration and noise.
Description:
Product  Name: Stepper Damper And Heat Sink
Damper Size: 54*54*7MM
Heat Sink Size: 40*40*11.3MM
Marerial: Steel & Rubber
Suitable For: Nema17 Stepper Motor
For: 3D Printer, CNC Machine
Package description：
Damper Heatsink :  1*Damper + 1* Heat Sink + 4*Screw
Note
The damper will be slightly scratched by friction during transportation. If there is a slight scratch, this is a normal phenomenon.
Notes:
Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement.
Please leaving a message before you give the bad feedback, if the products have some problems.
Thanks for your understandings
Feature:
1. These vibration dampers are suitable for 3D printer and other machine adopted NEMA17 stepper motors
2. Each package contains 4 pieces screws for you to use, enough for you to use and can provide a lot convenience in the process of using
3. Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3d Printer, eliminating vibration and effectively improving 3D printing  quality
4. 1 Piece Damper used per Stepper or Electric motor
5. 3D Printers see a 5-10dB reduction in noise when used on X and Y Axis steppers with the vibration damper for Nema 17.
6. Works on both Cartesian and Delta style Additive Manufacturing machines such as CR-10 Pair these with good filament for the best results in your 3D printer and remove vibration and noise.
Description:
Product  Name: Stepper Damper And Heat Sink
Damper Size: 54*54*7MM
Heat Sink Size: 40*40*11.3MM
Marerial: Steel & Rubber
Suitable For: Nema17 Stepper Motor
For: 3D Printer, CNC Machine
Package description：
Damper Heatsink :  1*Damper + 1* Heat Sink + 4*Screw
Note
The damper will be slightly scratched by friction during transportation. If there is a slight scratch, this is a normal phenomenon.
Notes:
Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
Compare the detail sizes with yours, please allow 1-3cm error, due to manual measurement.
Please leaving a message before you give the bad feedback, if the products have some problems.
Thanks for your understandings
On Nov 15, 2022 at 04:03:21 PST, seller added the following information: