235X235mm Glass Print Bed 3D Printer Plate Fits Ender 3 / Ender 5 Ender 3 Pro Y2

Description

You may also like
LCD Screen Display Controller With Cable For Creality 3D Ender 3 Pro Ender 5 H5
22.39 USD
Free shipping
MK8 Assembled Extruder Hot End Kit 0.4mm Nozzle 12V For Creality 3D CR10 10S H5
13.09 USD
Free shipping
5Pcs 3D Printer Accessories X/Y/Z Axis End Stop Limit Switch 3Pin for CR-10 S7
11.39 USD
Free shipping
Upgrade 3D Printer Accessories Synchronous Belt Stretch 2020 X for CR-10 Ender-3
13.89 USD
Free shipping
3D Printer 42-34 0.8A X/Y/Z-axis Stepper Motor Fit 3D Creality Ender 3Pro CR-10'
16.89 USD
Free shipping
Description
235X235mm Glass Print Bed 3D Printer Plate For Ender 3 / Ender 3 Pro ALFWISE U30/TEVO Tarantula Pro
Product Characteristics
1.Leveling: Use A4 paper to adjust to the platform and the nozzle till there is obvious hindrance, but to be able to pull.
2.Oily Clean: Severe oil on the surface of the platform will affect adhesion,if this happened, please heat the bed to 90℃, or put the printer aways for 8 hours, but the most direct way is to wipe a little with alcohol.
3.This product acid and alkali resistant, high temperature resistance 400℃.
4.The first layer of the product has a hardness of 0.5H, which is easier to be scratched, but the scratching does not affect the adhesion of the models.
5.This product will change color when rubbed repeatedly with alcohol, but will not affect normal use.
6.This product will enhance the viscosity and absorb oil ability of the platform after being slightly wiped with alcohol.
7.Try to avoid repeated touches on the platform by hand to prevent serious sweat from touching the platform.
8.This product is processed with a special process and will never appear in the glass, good solution to the problem of platform unevenness.
Temperature settings for different filaments:
PLA:50-70ºC
Flexible filament: 50-70ºC
ABS:100-125ºC (110ºCis recommended)
PC:100-130ºC (120ºC is recommended)
Nelon:90-120ºC (110ºC is recommended)
PP:100-130ºC (120 ºC is recommended)
PETG: 50-70ºC
Fit For Ender 3 / Ender 3 Pro / ALFWISE U30 / TEVO Tarantula Pro And More.
Specification:
Material:Special Glass + microporous coatings
Item size:235*235*4mm
Package included:
1*Glass
Photos Shown
About Shipment&Returns
The item usually will be dispatched within
3 days
after you ordered.All are free shipping.
And it usually takes
3-5 working days
to delivery depends on buyers' address or other majeure on the way.
If you are not satisfied with the items and want to return the item,we hope you could message us first,we will give you the return details,
we think we could give you the best service to save your time and money.Thank you.
About Feedback&Customer Service
If you are enjoy your shopping here,not only enjoy the items but also the service,we are appreciate you could give us a 5-star feedback.
If you are not satisfied with the item,before you give us the negative feedback,we hope we could give you the best solution through our commutication.
We think we could do it if you give us the chance.Thank you.