1PC Thermal Conductivity of TEP1-142T300 40*40MM Thermal Power Generator

Description

1PC Thermal Conductivity of TEP1-142T300 40*40MM Thermal Power Generator
Lead length: about 15CM
Dimension of power supply: 40MM long * 40MM wide * 3.4MM thick
The worded side is close to the heat sink (cold end)
The wordless side is pasted into the heat absorbing surface (hot end)
Red wire connects positive pole and black wire connects negative pole.
It can generate electricity when temperature difference exists.
Parameters:
Temperature difference 40 degrees:
open circuit voltage 2.2V, generating current 390MA
Temperature difference 60 degrees:
open circuit voltage 3.6V, power generation current: 489MA
Temperature difference 80 degrees:
open circuit voltage 4.8V, power generation current 569MA
Temperature difference 100 degrees:
open circuit voltage 6.0V, generation current 658MA
Temperature difference 120 degrees:
open circuit voltage 7.2, generation current 759MA
Temperature difference 140 degrees:
open circuit voltage 8.4, power generation current 969MA
Optimum Matched Resistance: 3.3-4.3
Temperature range from - 40 degrees to 300 degrees
The above values are for reference only. In practical use,
wiring and booster plate will lead to loss of current.
The operating temperature ranges from - 40 degrees to 200 degrees.
Temperature Resistance of 300 Degrees in Short Time
Long-term working temperature can withstand 250 degrees
1.warranty period 120daY
2.package included:1pc
On May-23-19 at 01:14:19 PDT, seller added the following information: